HOWO Synchronous Chip Sealer
Brief introduction ofr synchronous chip sealer
1. Synchronous chip sealer truck is the most effective road-resurfacing machine. It's designed to spray gravel and asphalt on the road, through the car crush to form a road surface. Synchronous Chip Sealer Truck is used in synchronous seal operation of each side of highway, It has better anti-slip and anti-seepage performance, more safety but less pollution.
2. The best advantage is that synchronous spread of adhesive materials and stone materials, which allows full contact between binders and aggregates, thus resulting in maximum cohesive performance.
3. Synchronous chip sealer mainly consists of chassis, asphalt spray system, chip spreading system, air circuit system, water circuit system, control system, rada speed measurement system, power supply system and mixing system.
4. This equipement takes the power from auxiliary engine, with stable and environmental performance; It adopts alarm in the cab, which can monitor and alarm the low level of aggregates in the hopper. It is no need of lifting the hopper to spread aggregates. The aggregates are transferred by belt, ensure they are conveyed to the double spiral distributor. The aggregates drop by gravity and friction against roller, then go through the distributor plate, which guarantees uniform spreading. It uses gravity slopping hopper to realize operation in height-limit condition, such as bridges and culverts. It adopts camber chip distributing device to improve the evenness. It uses stable dedicated controller to control the whole electric system, rear high-definition infrared cameras monitor the whole operation, which improve the working environment and efficiency.
Specifications
| Cabin |
Left hand drive/right hand drive |
| HW76 Cabin, with one bed and two seats, with AC |
| Vehicle Main Dimensions |
Overall dimensions (L x W x H)mm |
10210×2495×3450 |
| Wheel base (mm) |
4600+1350 |
| Weight in KGS |
Tare Weight |
16000 |
| Payload |
16000 |
| Front axles loading capacity |
1x7000 |
| Rear axles loading capacity |
2x16000 |
| Max. driving speed(km/h) |
90 |
| Engine |
Brand |
SINOTRUK |
| Model |
WD615.69 |
| Type |
4-stroke direct injection,6-cylinder in-line , turbo-charging and inter-cooling |
| Horse Power |
336 HP |
| Emission Standard |
EURO II |
| Gearbox |
HW19710, 10-forward & 2 reverse gear |
| Steering |
Power steering |
| Brake |
Dual air compressed brake |
| Tire |
12R22.5 radial tyre with one spare |
| Sprinkler Device |
Bitumen Tank size : 6cbm
Rock tank size : 10cbm
Bitumen pump: QGB 950 , 950L/Min
Hydraulic system : GPC4-50-25
Hydraulic motor: 05-130-BD31
Bitumen nozzle : 30
Spraying width: 3.75m
Spraying capacity: 0.25-4 kg/m2
Burner :G20
Generator : Hond 5.5KW |
| Control System |
German SIEMENZ, computer controlled |
Photos for reference
Audited Supplier 
){kind=link}